Lighting – AF4S-LED
Mounting
1）Constructed from 16-gauge steel,die-formed construction for max heat dissipation and rust protection
2）Precision tooled springs secure trim to mounting frame for effortless and tool-less installation
3) Compatible with C-channel, flat bar, wood joist bar ahanger and EMT.
4) Fully assembled for ease of installation
5) Non-IC housing require a minimum clearance of 3″ around from thermal insulation and 1/2″ from combustible material from above the fixture.
6) Ceiling thickness: 1/2″-3/2″
Junction Box
1) Pre-wired junction box provided with 1/2″ and 3/4″ knockouts, romex kncokouts with pry-out slots and strain clamps
2) Provided with removable access plates
3)Knockouts equipped with pry out slots
4) All leads are #18AWG wire, the ground wire connected to the bottom and quick connectors are supplied on all leads
5) Through branch circuit wiring(4 in, 4 out)
Reflector Option – AF4S-LED-EM
1) High quality reflector with 1.2mm thickness available finishes and types in multiple architectural finishes and types
2) Optional painted white flange is available
3)Single position optics eliminate possibility of specified lamp being installed in incorrect position
Thermal Protector
1) Meet ETL requirements
2) Standard thermal protection device guards against improper
installation, over lamping and misuse of insulation material
3) External thermal device located on the junction box wrap
Listing
ETL listed for damp location W/Feed through
Packing
50.5 X 36 X 16 CM 2PCS/CTN
Shop our selection of home lighting fixtures!
